At Mechanical Technologies, we understand that any heater repair can be a costly affair. However, there are things you can do in order to keep those costs low and get the most out of your heater or HVAC. Here are a few suggestions about what you should and shouldn’t attempt when it comes to heaters.
The Simple Solution
Always look for the simple solution before you spend any money. For example, heater repair might not be needed at all. If you find a room is a little cold when you have the heat on and can’t figure out why, take a moment to look around before you cry out ‘heater isn’t working!’. It could be something as simple as a window that isn’t closed right. Once you have inspected the room, check your air ducts. Are they open? Do they need to be replaced? A typical air vent replacement will cost you about $30- a whole lot cheaper than heater repair.
DIY Preventative Maintenance
Doing some regular maintenance yourself is also a big DO when it comes to preventing the need for heater repair. Some great things you can do yourself are:
- change your heater’s filters every month
- vacuum air vents and make sure they are not blocked by anything
- always inspect your air ducts for leaks or broken seams
- keep your heater and/or boiler areas free of clutter
When is it Time to Call the Professionals?
If your heater begins making strange sounds, your bills are unexpectedly high, or your heater fails to reach the temperatures you set it at, there is an internal problem going on. In these cases, unless you are a trained HVAC tech or heater repair expert, it is best if you don’t try and fix it yourself. Any kind of heater repair of this type should have a qualified technician look at it, and Mechanical Technologies offers some of the best services at an affordable prices. If you need heater repair, contact them today.
Leave A Comment